Part Number Hot Search : 
PI5FC IN3267 IN3267 26N50 DS18R 25P32 1N484B 28F00
Product Description
Full Text Search
 

To Download MN101CP28DAL Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  minimum instruction execution time 0.10 s (at 4.5 v to 5.5 v, 20 mhz) 0.238 s (at 2.6 v to 5.5 v, 8.39 mhz) 0.333 s (at 2.3 v to 5.5 v, 6 mhz) 1.00 s (at 2.0 v to 5.5 v, 2 mhz)* 125 s (at 2.0 v to 5.5 v, 32.768 khz)* * the lower limit for operation guarantee for eprom built-in type is 2.3 v. interrupts ? reset  watchdog  external 0  external 1  external 2  external 3  external 4  timer 0  timer 1  timer 2  timer 3  timer 4  timer 5  time base  serial 0  serial 1  serial 2  automatic transfer finish  a/d conversion finish timer counter timer counter 0 : 8-bit 1 (square-wave/8-bit pwm output, event count, generation of remote control carrier) clock source 1/1, 1/4 of system clock frequency; 1/1 of osc oscillation clock frequency; external clock input interrupt source coincidence with compare register 0 timer counter 1 : 8-bit 1 (square-wave output, event count, synchronous output event) clock source 1/16, 1/64 of system clock frequency; 1/1 of xi oscillation clock frequency; external clock input interrupt source coincidence with compare register 1 timer counter 0, 1 can be cascade-connected. timer counter 2 : 8-bit 1 (square-wave/8-bit pwm output, event count, synchronous output event) clock source 1/1, 1/4 of system clock frequency; 1/1 of xi oscillation clock frequency; external clock input interrupt source coincidence with compare register 2 timer counter 3 : 8-bit 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) clock source 1/4, 1/16 of system clock frequency; 1/1 of osc oscillation clock frequency; external clock input interrupt source coincidence with compare register 3 timer counter 2, 3 can be cascade-connected. timer counter 4 : 16-bit 1 (square-wave/16-bit pwm output, event count, synchronous output event, input capture) clock source 1/4, 1/16 of system clock frequency; 1/1 of osc oscillation clock frequency; external clock input interrupt source coincidence with compare register 4 time base timer (one-minute count setting, independently operable 8-bit timer counter 5) clock source 1/4 of system clock frequency; 1/1, 1/8192 of osc oscillation clock frequency; 1/1, 1/8192 of xi oscillation clock frequency interrupt source coincidence with compare register 5; 1/8192 prescaler overflow watchdog timer interrupt source 1/65536, 1/262144, 1/1048576 of system clock frequency (rom option) ram ( 8-bit) external memory can be expanded rom ( 8-bit) external memory can be expanded type mn101c28a package (conventional package) mn101c28a , mn101c28c , mn101c28d , mn101c28f , mn101c28l mn101c28c mn101c28d mn101c28f mn101c28l 32 k 48 k 64 k 96 k 96 k 1.5 k 2 k 2 k 4 k 10 k [all lead-free] lqfp080-p-1414a, tqfp080-p-1212d, qfp084-p-1818e (tqfp080-p-1212c) lqfp080-p-1414a *lead-free mad00006eem 24
mn101c28a , mn101c28c , mn101c28d mn101c28f , mn101c28l serial interface serial 0 : synchronous type/simple uart (half-duplex) 1 clock source 1/2, 1/4, 1/16 of system clock frequency; output of timer counter 3 serial 1 : synchronous type 1 clock source 1/2, 1/8, 1/64 of system clock frequency; output of timer counter 3 serial 2 : synchronous type/single-master i 2 c 1 clock source 1/4, 1/8, 1/16, 1/32 of system clock frequency; 1/4 of timer counter 0 frequency special ports buzzer output, remote control carrier signal output, high-current drive port a/d inputs 10-bit 8-ch. (with s/h) i/o pins 57  common use  specified pull-up resistor available  input/output selectable (bit unit) i/o 13  common use  specified pull-up resistor available input electrical characteristics supply current limit symbol condition min typ max unit parameter idd1 fosc = 20 mhz, vdd = 5 v 25 50 ma idd2 fx = 32.768 khz, vdd = 3 v 40 120 a idd3 fx = 32.768 khz, vdd = 3 v, ta = 25 c4 8 a fx = 32.768 khz, vdd = 3 v, ta = 85 c2 0 a idd4 vdd = 5 v, ta = 25 c1 a vdd = 5 v, ta = ? 40 c to +85 c3 0 a operating supply current supply current at halt supply current at stop see the next page for pin assignment and support tool. mad00006eem 25
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 1 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 vref- an0,pa0 an1,pa1 an2,pa2 an3,pa3 an4,pa4 an5,pa5 an6,pa6 an7,pa7 vref+ vdd n.c. osc2 osc1 vss xi xo mmod txd,sbo0,p00 rxd,sbi0,p01 sbt0,p02 nbt,p34 nbr,p33 sbt2,p32 sbi2,p31 sbo2,p30irq4,p24 irq4,p24 irq3,p23 irq2,p22 sens,irq1,p21 irq0,p20 n.c. tm4io,p14 tm3io,p13 tm2io,p12 tm1io,p11 rmout,tm0io,p10 nrst,p27 ndk,buzzer,p06 sbt1,p05 sbi1,p04 sbo1,p03 p63,a3 p62,a2 p61,a1 p60,a0 p54,a17 p53,a16 p52,ncs p51,nre p50,nwe n.c. p47,key7 p46,key6 p45,key5 p44,key4 p43,key3 p42,key2 p41,key1 p40,key0 p37,ndkdma p36,nstdma p35,nlddma p64,a4 p65,a5 p66,a6 p67,a7 sdo0,p70,a8 sdo1,p71,a9 sdo2,p72,a10 sdo3,p73,a11 sdo4,p74,a12 sdo5,p75,a13 sdo6,p76,a14 sdo7,p77,a15 n.c. p87,led7,d7 p86,led6,d6 p85,led5,d5 p84,led4,d4 p83,led3,d3 p82,led2,d2 p81,led1,d1 p80,led0,d0 type mn101cp28dbf , MN101CP28DAL , mn101cp28dht , mn101cp28lal rom ( 8-bit) 64 k / 64 k / 64 k / 96 k ram ( 8-bit) 2 k / 2 k / 2 k / 10 k minimum instruction execution time 0.10 s (at 4.5 v to 5.5 v, 20 mhz) 0.238 s (at 2.6 v to 5.5 v, 8.39 mhz) 0.333 s (at 2.3 v to 5.5 v, 6 mhz) package [all lead-free] lqfp080-p-1414a, tqfp080-p-1212d, qfp084-p-1818e (conventional package) (tqfp080-p-1212c) support tool eprom built-in type in-circuit emulator px-ice101c/d+px-prb101c28-tqfp080-p-1212 px-ice101c/d+px-prb101c28-qfp084-p-1818e px-ice101c/d+px-prb101c28-lqfp080-p-1414a pin assignment lqfp080-p-1414a * lead-free tqfp080-p-1212d * lead-free [mn101c28a/28c/28d] (tqfp080-p-1212c) qfp084-p-1818e * lead-free mn101c28a mn101c28c mn101c28d mn101c28f mn101c28l mn101c28a mn101c28c mn101c28d 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 vref- an0,pa0 an1,pa1 an2,pa2 an3,pa3 an4,pa4 an5,pa5 an6,pa6 an7,pa7 vref+ vdd osc2 osc1 vss xi xo mmod txd,sbo0,p00 rxd,sbi0,p01 sbt0,p02 bt,p34 br,p33 sbt2,p32 sbi2,p31 sbo2,p30 irq4,p24 irq3,p23 irq2,p22 sens,irq1,p21 irq0,p20 tm4io,p14 tm3io,p13 tm2io,p12 tm1io,p11 rmout,tm0io,p10 rst,p27 dk,buzzer,p06 sbt1,p05 sbi1,p04 sbo1,p03 p63,a3 p62,a2 p61,a1 p60,a0 p54,a17 p53,a16 p52,cs p51,re p50,we p47,key7 p46,key6 p45,key5 p44,key4 p43,key3 p42,key2 p41,key1 p40,key0 p37,dkdma p36,stdma p35,lddma p64,a4 p65,a5 p66,a6 p67,a7 sdo0,p70,a8 sdo1,p71,a9 sdo2,p72,a10 sdo3,p73,a11 sdo4,p74,a12 sdo5,p75,a13 sdo6,p76,a14 sdo7,p77,a15 p87,led7,d7 p86,led6,d6 p85,led5,d5 p84,led4,d4 p83,led3,d3 p82,led2,d2 p81,led1,d1 p80,led0,d0 ( ) : conventional package mad00006dem 26


▲Up To Search▲   

 
Price & Availability of MN101CP28DAL

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X